【#文档大全网# 导语】以下是®文档大全网的小编为您整理的《自行车手闸套手刹套刹车套测试报告模板-RIM BRAKE SET》，欢迎阅读！
XXXXX XXXXX XX Co., Ltd
TEST REPORT
说明：本测试报告是我们根据自行车相关标准整理的报告模板，所有工厂或者实验室都可以借鉴使用，可以节省很多时间，因为编制一份模板还是比较难的，很费时间。这个下载过去，调整一下数据，修改一下公司名称、地址、报告编号、报告日期、产品名称、产品型号、商标、签发日期，这些都修改一下，就可以直接使用，报告的格式我们都按照正规测试报告的格式处理好了，下载即可使用。
INSPECTION NUMBER：2019121806-22 TEST DATE：2019-12-18
PRODUCT NAME：RIM BRAKE SET PRODUCT MODEL：XXX BRAND：XXXX
PRODUCTION FACTORY：XXXXX XXXXX XX Co., Ltd PRODUCTION STANDARD：QB/T1891-2012
TEST ITEM STANDARD Testing requirements
Breaking force
test Locking performance
test
Brake band strength test
QB/T1891-2012
Stretching speed is not greater than 20mm/min Stretching speed is not greater than 20mm/min Stretching speed is not greater than 20mm/min 1.After the tensile test with the force of 5000n, the brake belt and the
RESULT
11mm/min
Verdict
PASS
QB/T1891-2012 14mm/min PASS
QB/T1891-2012 12mm/min PASS
SECURITY TEST
QB/T1891-2012
Static braking performance
connection at both ends of the brake belt shall not be
damaged.
2.After applying 10J impact force to the brake handle, the brake handle shall not be damaged or broken. 3.The breaking force of the Meet the joint assembly of steel rope requirements and steel rope must be greater than 1500N. 4.The breaking force of the upper and lower joint assemblies of the rear pulling tube and the pulling tube must be greater than
2000N.
5.The rope shall not slide under the action of 1000N tension, and the locking performance of the rope
must meet the requirements.
QB/T1891-2012 Test load：200F/N， 46N
Static braking torque：＞40N
After 5000 durability tests, the brake system and its parts shall not be damaged or broken. It shall not fall off
or deform
＜70（dB）
＜0.3mm
0.1mm Meet the requirements
PASS
PASS PASS
Brake durability QB/T1891-2012
Brake noise
Radial circular
jump
QB/T1891-2012 QB/T1891-2012
43（dB）
PASS
PASS PASS
The mounting screws on the front fork and handlebar Meet the
Screw reliability QB/T1891-2012 shall be equipped with requirements
suitable locking devices, such as locking rings and
nuts.
After 10000 times of fatigue Fatigue strength test, the joint of Meet the strength of QB/T1891-2012 steel wire rope shall not fall requirements assembly off and each steel wire rope
shall not break.
The appearance quality, coating thickness, surface
Electroplating QB/T1891-2012 roughness and corrosion Meet the
PASS
resistance of chromium plated parts shall meet the requirements of relevant
standards.
The appearance quality, impact strength and Paint quality QB/T1891-2012 corrosion resistance of the
paint film shall meet the requirements of relevant
standards.
The appearance quality,
Powder coating impact strength and
quality QB/T1891-2012 corrosion resistance of
powder coating shall meet the requirements of relevant
standards.
A. There shall be no rust spot, crack, scar and other Other obvious defects on the appearance QB/T1891-2012 surface of the brake, quality B. There shall be no sharp
angle, flash, burr on the handle and all parts of the
brake body,
C. The trademark mark shall be clear and complete, without color difference, dislocation or obvious
defects.
quality requirements PASS
Meet the requirements
PASS
Meet the requirements
PASS
Meet the requirements PASS
RESULT: as per each standard, the result is QUALIFIED.
TESTER： checker： authorized： Date of issue：2019-12-18
本文来源：https://www.wddqxz.cn/39f360cc30b765ce0508763231126edb6e1a76c6.html
2022-04-27
