不良现象中英文对照表

2024-01-05 00:18:19 文档大全网 [ 字体：小中大 ] [ 阅读： ]

【#文档大全网# 导语】以下是®文档大全网的小编为您整理的《不良现象中英文对照表》，欢迎阅读！
对照表,中英文,不良,现象
良现象中英文对照表

不良现象中英文对照表

1. 缺件(MISSING PARTS)…missing parts 2. 错件(WRONG PARTS) wrong parts 3. 多件(EXCESSIVE PARTS…excessive parts 4. 短路(SHORT…short 5. 断路(OPEN)-open

6. 线短(WIRE SHORT…wire short 7. 线长(WIRE LONG)…wire long

8. 拐线(WIRE POOR DDRESS)-wire poor adress 9. 冷焊(COLD SOLDER)…cold solder 10. 包焊(EXCESS SOLDER)-excess solder 11. 空焊(MISSING SOLDER)- missing solder 12. 锡尖 (SOLDER ICICLE) … icicle 13. 锡渣(SOLDER SPLASH)-• solder splash 14. 锡裂(SODER CRACK)-solder crack 15. 锡洞(PIN HOLE)..solder hole 16. 锡球(SOLDER BALL)..sloder ball 17. 锡桥(SOLDER BRIDGE…solder bridge 18. 滑牙(SCREW LOOSE)-screw loose 19. 氧化 (RUST) … rust

20. 异物(FOREIGNER MATERIAL)-• foreigner material 21. 溢胶 (EXCESSIVE GLUE) 22. 锡短路 (SOLDER BRIDGE) 23. 锡不足 (SOLDER INSUFFICIENT) 24. 极性反 (WRONG POLARITY) 25. 脚未入 (PIN UNSEATED) 26. 脚未出 (PIN UNVISIBLE) 27. 脚未剪 (PIN NO CUT) 28. 脚未弯 (PIN NOT BENT) 29. 缺盖章 (MISSING STAMP)

30. 缺标签 (MISSING LABEL) … missing label 31. 缺序号 (MISSING S/N) 32. 序号错 (WRONG S/N) 33. 标签错 (WRONG LABEL) 34. 标示错 (WRONG MARK) 35. 脚太短 (PIN SHORT) 36. J1 不洁 (J1 DIRTY) 37. 锡凹陷 (SOLDER SCOOPED)

38. 线序错 (W/L OF WIRE) 39. 未测试 (NO TEST)

40. VR 变形(VR DEFORMED]・deformel 43. 零件沾胶 (GLUE ON PARTS) 41. PCB 翘皮(PCB PEELING) 42. PCB 弯曲(PCB TWIST) 44. 零件脚长 (PARTS PIN LONG) 45. 浮件 (PARTS LIFT)

46. 零件歪斜 (PARTS TILT) ] tilt 47. 零件相触 (PARTS TOUCH) 48. 零件变形 (PARTS DEFORMED) 49. 零件损坏 (PARTS DAMAGED) 50. 零件脚脏 (PIN DIRTY) 51. 零件多装 (PARTS EXCESS) 52. 零件沾锡 (SOLDER ON PARTS) 53. 零件偏移 (PARTS SHIFT) 54. 包装错误 (WRONG PACKING) 55. 印章错误 (WRONG STAMPS) 56. 尺寸错误 (DIMENSION WRONG) 57. 二极管坏 (DIODE NG) 58. 晶体管坏 (TRANSISTOR NG) 59. 振荡器坏 (X'TL NG) 60. 管装错误 (TUBES WRONG)

61. 阻值错误 (IMPEDANCE WRONG])impedance 62. 版本错误 (REV WRONG)

63. 电测不良 (TEST FAILURE)] test failure 64. 版本未标 (NON REV LEBEL) 65. 包装损坏 (PACKING DAMAGED) 66. 印章模糊 (STAMPS DEFECTIVE) 67. 标签歪斜 (LABEL TILT)

68. 外箱损坏 (CARTON DAMAGED])carton damaged 69. 点胶不良 (POOR GLUE) 70.IC 座氧化 (SOCKET RUST) 71. 缺 UL 标签 (MISSING UL LABEL) 72. 线材不良 (WIRE FAILURE) 73. 零件脚损坏 (PIN DAMAGED)

74. 金手指沾锡 (SOLDER ON GOLDEN FINGERS) 75. 包装文件错 (RACKING DOC WRONG) 76. 包装数量错 (PACKING Q'TY WRONG) 77. 零件未定位 (PARTS UNSEATED) 78. 金手指沾胶 (GLUE ON GOLDEN FINGERS) 79. 垫片安装不良 (WASHER UNSEATED])unseat 80. 线材安装不良 (WIRE UNSEATED) 81. 立碑 (TOMBSTONE)